Entries Tagged 'Computers' ↓

With remote computer repair, small businesses without their own computer repair technicians can have their software related problems fixed almost instantly. This is very important for any small business that depends on their computers and cannot wait for a local technician to show up. A remote computer repair service is very convenient, but is it safe?

It is safe to allow remote computer repair, even for a business with confidential information stored on their computer. You simply download a program from the computer repair company’s website that allows your computer to be controlled remotely. You can even watch your monitor and see everything that is being done. You can terminate the program instantly if you detect any breach of security. If you are worried about the remote computer repair service coming back to your computer later, don’t be. The program is removed from the computer and cannot be accessed by the remote computer repair company.

It is just as safe as having an unknown computer repair person come into your business and work on your computers. If fact, it probably is safer because a technician working on a computer will not allow you to peer over their shoulder and watch every move they make. Let your businesses enjoy the benefits and convenience of remote computer repair without any worry.

Working with the computer is very exciting. This sophisticated device can help you finish your work faster. You can find many useful programs on the computer to make your job easier. With only some clicks, you can finish your project on time and get the best result. Unfortunately, the computer is sometimes can’t work properly. The hardware can suddenly damage or the software can’t run well. This condition is surely annoying. Therefore, you had better find a way to make it runs well again.

You can ask a computer expert to solve your problem. An expert in the computer hardware and software definitely knows how to make your computer performs well. A computer expert that can find the best solution is Computer Too Slow. This portal comes with much information on how to make your computer better. If your computer is getting slower, now you can increase the speed with their help. Today, they come with many useful tips for slow computer. This portal diagnoses many factors that can make your computer gets slower. After that, they come with the right solution to boost the speed. With their help, you don’t need to go to the local computer specialist. You will be able to handle the problem only by reading their articles. They present the detail information that can help you take the right action. Do you have problem with overheating computer? If yes, you will be free from the problem soon. This site informs you how to fix computer overheating problem. They will tell you every step that you should do to make your computer back to its normal condition. Make sure that you check the articles carefully so that you will not take the wrong actions.

Today, handling computer will be simpler and easier. You just need to connect to the internet and visit Computertooslow.com. Here, all information about computer is available for you. You can check it every day and get fresh information about computer hardware and software. Please go to the site now and learn more about computer.

If you are freelance web designer who just started out in the web designing business you might want to spend some time in searching for the right computer. Of course there are many choices now, but you need to decide what are the important factors.

Computers are pretty cheap now days and most of them are powerful enough to run most web design softwares like Dreamweaver and Photoshop. If you have just started out then you might want to consider something with slightly lower specs. Just make sure the main board allows you to upgrade the system to higher spec when needed. Ideally, it should support up to at least 8GB of memory and fastest CPU on the market.

One of the most important component for a freelance web designer is the monitor. You need something that can display wide range of colors because you will be dealing a lot of them! If you are planning to do print work as well then you need to spend a bit more. Personally I think you should buy the best monitor you can afford, because you will be using it for at least a year or so and it cannot be upgraded. Monitor makers like LG, Lacie, Dell and Samsung are some of the best in the market. You need to do some research to find the best one for your business. You can use sites like Google and Amazon to find reviews of them. And if you have the time you should visit your local PC stores to see how good the monitors are in action. You will be able to see things that you cannot from photos!  

Coming up with the idea to create your own website you realize that your site, though being a virtual representation of your business, needs some space on the web. Hosting companies provide different hosting plans for any type of budget and assure you that your site will be absolutely fine with the current plan chosen in the beginning of your online business.

On the top of the internet space and maintenance they might offer you to create website with the help of their sitebuilder. You are not a programmer or designer with the special skills and a bunch of necessary software and you might ask yourself “Why not?”

Before you make a decision to make your own website with a hosting company take into consideration the opposite variant – sitebuilder with an independent and not overflow server without tons of other sites not connected with the actual service.

Just now Site2you offers unlimited hosting space that gives many advantages
- Unlimited number of pages – you think on how to make a website not on how to shrink all of the information in a few pages to fit your budget
- Unlimited space on the server – that guarantees a save and permanent storage for your PDF, video, audio or other files for review or download by your clients
- Unlimited bandwidth – literally speaking the number of the visitors allowed on your site or the amount of information downloaded from your site. Build website without making your visitors and clients wait in line to get to see it!
- Unlimited number of emails connected with your virtual address
Site2you offers one standard Package of services at an affordable price and you are assured to create a website with high quality maintenance even though your company is not yet a huge corporation.

Definitely having presented your company online you make it grow day by day and your business opportunities grow as well.

You are free to build a website and not stick to the same structure, design or information posted. Change, grow, update your website and attract success in many ways with your Internet business presence.

Well, we’ve been warned that this time would come - probably from the earlier eighties on. Yes, computers have finally taken over and if you doubt it, we’re here to convince you - but not because we want to or because we can. We want to convince you that if you don’t take the necessary steps to control that reign, you’re going to be left behind further than you could have ever imagined.

Computers are everywhere. Take a moment to try and think of a place a business where you didn’t see a computer in use. From the small local corner store to the largest hospital, computers are in every gas station, grocery store, bank, restaurant, beauty shop, and doctor’s office around. From a consumer’s point of view - you may not think that’s much to worry about. But along with computers, we’ve also been infiltrated with a little thing called “self-service.” Today, there are more self-serviced resources than ever and in an effort to synchronize them with headquarter databases, they’re provided via your inescapable computer.

Here are some examples. Banking is self-serviced through the desktop-clad ATM machine. Gas stations are self-serviced through a menu-clad touch screen kiosk. Most cash registers are Windows XP or Vista machines that send purchase details back to headquarters via the Internet (or a small Intranet). Having your weight, blood pressure, and heart rate measured and recorded is now a digitized process. Even ordering a pizza is now a simple matter of dialing from a wireless cell phone and making a few selections from series of pre-programmed menus!

The important thing to realize here is that this phenomenon isn’t a new convenience - it’s a new requirement. And if you haven’t jumped onto the binary wagon, you’re going to face a few problems. For just as this new lifestyle was once predicted, we’re going to predict that “the old ways” will slowly disappear.

We’re going to predict that all paper-based transactions (checks, money orders, etc.) and documentation (think of the old filing cabinet system) will disappear. We’re going to predict that chips will replace everything that was once transported from one location to another through the trusty post office. And we’re going to predict that homes will become less cluttered with stacks of paper and that our natural resources will flourish as a result of it.

This all sounds fine and dandy of course, but if you’re not computer savvy, you’re going to feel a little lost once the choice has past and the revolution is 100% complete. Fortunately, computer systems are designed in a way that even a child can manipulate them. In fact, if you can remember that most systems are designed along the line of menus and the selections of a few options on these menus, you’ll do just fine no matter how many buttons there are to push.

For example, when you’re faced with an electronic system, look for a main menu. Most main menus display themselves as soon as a device is turned on, so chances are that if you’re standing before a device that shows a bunch of choices to do something, you’re looking at a main menu. The buttons on these main menus of course take you to additional menus, which in turn give you even more choices to make. And all of those choices will eventually bring you to the service that you need. One very important choice you’ll want to keep your eye on is the option to return to the main menu. This way, you can return to the beginning of a system and start over in case you get lost among the way.

Another important choice that you want to keep your eye on is the choice to get help! This option may not be available on every device that you encounter, but when it is available, be sure to use it.

There’s just no way around it. Computers and computerized systems are here to stay. There’s no need to fear them - but you surely can’t avoid them. Just remember the menu system and you’ll soon discover that you can approach and use these things as if you designed them yourself.

These days it’s strange to hear people say, “I’m just not computer literate,” as computers have evolved from archaic scientific calculators to simple point-and-click type machines. We suspect that today’s “computer illiterates” are people who haven’t taken the time to experiment with such a machine. And we strongly believe that spending just twenty minutes with one could turn the most adamant technological caveman into any one of those who have fun wreaking chatroom havoc on the Internet today.

Today, one only needs to learn how to manipulate a mouse, punch a few buttons on a keyboard, or really just turn the thing on to use a computer. It’s hard for some folks to believe, but the computers of this generation almost run themselves! For fun, let’s investigate just how little knowledge these thousand-dollar machines actually require.

Can an absolute newbie operate a computer without knowing how to use a mouse or keyboard? Assuming that a computer is set up to operate on voice command - sure! Voice command software allows users to tell a computer what to do and the computer responds by fulfilling the user’s commands. Although it’s pretty new and still under development, voice directed technology has already infiltrated consumer service related systems.

Think back to the last time that you paid a bill over the phone. Instead of speaking to a human being, chances are that you spoke to a computer that not only responded to what you said and followed the commands that you gave it, it also asked you for more information such as your full name or credit card number. In this case, a person (such as yourself) operated a computer without even knowing it!

Can an absolute newbie sit down at a computer without knowing how to use one? Assuming that a computer is set up to operate on touch command - the answer is again, yes! Touch command software allows users to literally touch objects on a monitor and tell the computer what to do with a finger. Known as “kiosks,” these programs are already in use world wide at ATM machines, employment centers, and in health monitoring systems.

Neither a mouse nor a keyboard is required. A computer user only needs to touch various boxes on a screen to control a computer. Sure, the programming behind such technology is extensive and advanced, but to the end user, it makes computer use less intimidating and plain easy.

Of course when we talk about operating a computer, we envision more involvement than speaking on the phone or touching things on a screen. The above illustrations were just a couple of examples of how far computer technology has grown, and how far we’ve pushed “user-friendliness” to its limit. Eventually, the keyboard and mouse will have to play a role when computer newbies have to work with one as a cash register, as a hotel booking program, or as a library’s catalog system.

These requirements don’t make computers any less easier to operate, but they don’t make them that much harder either. So much of today’s software is designed to accommodate the experience of a new user that anyone could get connected to the Internet, send an email message, and download an MP3 file within the first five hours of purchasing a personal PC.

tuyhj7dz8g

At some point, your needs are going to outgrow the capabilities of your computer. You may find yourself in need of more hard drive space for all those videos and mp3s that you download, for example. Or maybe that cool new programming language you’ve been dying to try requires more memory than what your computer currently has. Unless the activities on your computer are restricted to pure textual output (plain text files), your computer is going to get filled with a lot of “stuff” - stuff that can overfill a PC’s capacity too much for the computer to function well.

The problem is that while upgrading a computer is always an option, technology advances so fast that newer products (such as memory chips, new drives, etc.) aren’t always compatible with the machines that we own. This is a common occurrence when newer pieces of hardware require the programming of a newer operating system. Sure, one could upgrade the operating system to accommodate the demands of a new piece of hardware, but trouble starts when that new operating system requires new hardware in return. If we’re not careful, we could end up replacing almost every hard and soft part of a computer that we own - all in an effort to upgrade! Upgrading in this fashion is not only silly to do so, it’s also costly - more costly than simply buying a new computer.

But once the decision to buy a computer is set in stone, what can be done with the old one? There are alternatives to selling a computer and this article is going to introduce a few of them.

1. Give it to the kids. This is of course, assuming the kids are too young to whine about not having enough SDRAM or less than a 160GB hard drive. Today’s “older” computers are perfectly capable of accommodating the needs of young PC users, and they’re excellent machines for playing educational CDs, small multimedia files, or games downloaded from the Internet. And don’t forget the most important role they play in a child’s homework-clad life: A simple encyclopedia CD on a used computer makes excellent research tool (not to mention a rather fancy calculator!).

2. Donate it to a less-fortunate or less-literate family member. We often joke around the office about the “grandma” who refuses to use a computer until she can afford the “latest” one. Chances are, Grandma isn’t ever going to shell out the bucks to buy the latest computer on the market, nor is she going to know how to use it once she gets it. What Grandma doesn’t realize however is that a used computer is an excellent training tool that she can use to prepare herself for something “better” in the future. We always say, “‘Tis better to screw up something on an old, used machine than to screw up everything on a brand new one!” A couple of errors on an old, used machine are easier to fix because someone is going to have the experience and knowledge to fix it. Errors on a new machine however can be a beast to fix because we’re all knocking at Microsoft’s door looking for answers.

3. Convert the machine into a storage area. As another alternative to selling that machine, we suggest that people disconnect it from the Internet and use it to store personal documents, records, or files. This way, personal data (such as bank statements, store receipts, health records, etc.) is protected from prying viruses or hackers, while the newer machine is used to surf the net.

As you can see, old computers still serve a purpose either for you or for someone else. And although selling an old computer is always an option, there are a number of things that you can do with an old computer. All that’s required is a little “out of the box” thinking and a grateful recipient.

If you’ve spent any lengthy amount of time on the Internet, you’ve probably heard of open source software but might not have fully understood what it is and why it even exists.  This article will describe this recent phenomenon and describe some of its benefits for the software using community.

In a nutshell, open source software is software made by everyone - for everyone. The hopes behind its development is that through its open access, it will evolve into something that represents the true desires of computer users. Through a wide network of user involvement, the software in question is enhanced and debugged without costs or administrative politics.

Traditionally, software is developed behind closed doors. A team of professional coders build it but the community at large isn’t part of its conception. It’s costly to produce and as you can probably guess, that cost is passed on to the end user: the consumer. Open source software on the other hand is free. Free to download, free to install, free to use, free to modify, and free to share.

Started over twenty years ago, it’s a phenomenon that is gaining in both popularity and exposure. In its first conception, open source gave birth to the World Wide Web as we know it today. The Internet as a whole is the result of free permission to access the web, use the web, contribute to the web, and share the web with others. But it certainly hasn’t stopped there. In the not too distant past, Netscape converted its once commercial version of its Navigator web browser to open source. And today, open source is venturing into the commercial realm as well.

At first thought, the idea of open source may sound just plain crazy to those who earn a living from software development. But the facts point to a different prediction. Open source software puts companies in a terrific position to re-brand and re-position themselves in a market that they may have not been able to reach before. In the business world, open source is all about image and when consumers witness corporations contributing (instead of selling) to the buying public, they gain big favor in the eyes of their users (plus tremendous opportunities to sell other items).

Inviting the public inside a product’s development builds community and trust. It also sets the platform for increased reliability. Fans of open source programs are adamant about reliable software and highly criticize commercialized versions for being buggy and error-prone. Avid fans even proclaim commercialism is the cause of shoddy software.

Another benefit that open source brings to light is the speed at which its products are developed, enhanced, supported and distributed. This is because the people who regularly contribute to an open source product do so for unmotivated reasons (other than perhaps to feed the ego.) They’re highly talented, they’re available, and they care. Bringing money into any project can almost mean instant death. It can kill motivation, desire, and a true willingness to create a good product. In a commercial setting, participants work for a paycheck rather than for the product. And this is what puts open source projects far ahead of its monetized competition.

As a software user, this means you can contribute to an open source project as well, and help to develop it into a product that reflects your direct preferences. You aren’t “stuck” using open source software the way you would be stuck using an expensive word processor or database. You have the same access to open source software as its programmers have and in essence, you are your own customer!

Perhaps at this point you’re wondering where you can get in on this wonderful opportunity. There are plenty of open source opportunities sprinkled across the Internet and they can be easily found though any search engine. Google “open source project” and you’ll be sure to find more resources than you can shake a stick at!

Have you ever thought about networking your computers at home? If you have a small collection of computers around the house (and a small collection of computer users), you can connect each one of those computers to one another and share data, software, and hardware including a single Internet connection. There are many creative uses for home networking, however it’s an ideal situation when upgrading each computer to the same capability is financially out of the question. On a home network, each computer has access to the equipment of the better machine in the group as if that equipment were their own.

Connecting computers with either an Ethernet cable or a Wireless connection can create a home network. The easiest and cheapest method uses an Ethernet connection, which requires a series of network cards, a cable for each computer, and a router. The network card is similar to the old modems we used in the past to connect to the Internet, however in a home network, it’s used to communicate with every computer that’s connected to it.

You’ll want to first, select the computers that will connect to each other and then install the network cards inside each of them. Then you’ll connect a cable to each computer that will communicate with the server. These cables won’t connect to the server directly. Instead, they’ll connect to the router. To enable Internet access for each computer, this router will need to connect with a modem of the host machine.

Once the hardware is set up correctly (you’ll need to read the instruction manual of your equipment for details), you can then setup the network from Windows on each machine. Within Windows, you can set up a home network similar to the way that you set up an Internet connection. Only this time, you’ll set up a LAN (Local Area Network) connection.

Windows should walk you through setting up a LAN after starting the computer and once complete, you can begin to connect one of your machines to the network. You can do this through Internet Explorer by typing in the address and password required to access the router (the address and password required to access the router will be in the router manual).

Connected to the network, each computer can send files back and forth, open programs on a remote computer, play the sound files and videos located on another computer, and share a single Internet account to browse the web, download files, or chat with someone in an entirely different country.  If a single printer is available on only one computer in the network, every connected PC can send documents to it and print them out. Kids will enjoy the ability to play multi-player games and adults will enjoy the ability to blast a single message to everyone at once or maintain a group schedule.

Since we’re describing a home network that will connect to the Internet, you’re strongly advised to install a protective firewall program to thwart Internet viruses, worms, or other damaging spyware code. Firewalls prevent - but they don’t repair. Only anti-virus and anti-spyware programs can reverse damage. So you should install a firewall on the computer that grants access to the computer, and then install an anti-virus and anti-spyware program on each of the remaining computers in the network.

If you have files that shouldn’t be shared (bank statements, credit card information, etc.), you can restrict their access in one of several ways. You can put them in a new folder and then remove the “read” permissions for that folder. Or you can specify who can (and who cannot) access specific files with a password from within Windows Control Panel.

If you’re familiar with MS-DOS at all, you’ll recall that it’s a command-driven operating system that performs functions issued at the C:> prompt. The only way to get an MS-DOS computer to do something was to type a command at this prompt and if you can imagine, it was a rather cumbersome way to use a computer.

As an example, to load up Microsoft’s simple editing program, you had to type the name of the drive that the program was on, the directory that the program was in, and then the name of the program. So if Microsoft Edit was in a directory or folder named “Process,” you could start the program by typing, “C:>process\edit.com” Then, and only then would the program load up for use.

This is a small command, but just imagine if you had a program that was deeply nested within a series of folder. You could end up typing a command as wide as your computer screen or worse, long enough that the entire command would have to wrap onto the next line! Now imagine having to type these long commands every time that you wanted to start a program. Yikes!

That’s one of the reasons why batch files became so popular. Batch files are small text-based documents that contain a bunch of these commands on their own lines. When executed, they would process each command without the user having to type each and every one of them.

When Windows was developed, the need for typing commands was essentially eradicated thanks to the introduction of the point-and-click (mouse) interface. But this didn’t stop the batch file fever that started under MS-DOS - and in some small circles, batch files are still as popular as they were in the beginning.

Even though you may use Windows XP or Vista, batch files can save you tons of time by automatically starting multiple programs and performing different tasks at the single click of a button. They don’t require any extensive programming background and they don’t need to be encrypted with some weird, expensive compiler. Batch files are plain text files, and you can build one for your own personal use with Windows’ Notepad.

You could make a batch file that loads up your favorite websites at once for example, or you could make a batch file that fills your desktop with the most important applications for the day. To do so only requires a little knowledge about the locations of these applications.

Let’s say that every day we need to load up the Yahoo web browser, Microsoft Word, and then the calculator that comes with Windows. Instead of doing this by hand, we could write a batch file to do it for us.

First, we’d load up Notepad and type in the following:

START “http://www.yahoo.com”
START “c:/program files/microsoft office/office/winword.exe”
START “c:/windows/calc.exe”

We would then save this data into a file named, “mytasks.bat” onto the Desktop for easy access. Each time we double-clicked on this file, the Yahoo website would load up, Microsoft Word would start, and the simple calculator would pop up.

Since we want these programs to load every day, we could create a shortcut to this file and then place the shortcut inside our computer’s Start Up folder. That way, these three programs would load every time we turn on the computer. If you wanted these programs to start minimized, you could type the following into a batch file instead:

START http://www.yahoo.com /m
START “c:/program files/microsoft office/office/winword.exe” /m
START “c:/windows/calc.exe” /m

This will run all three programs as before, however the “/m” parameter will minimize them so that they don’t clutter up the desktop.

Other people have found much more creative and effective ways to use batch files, but the important thing is that you know they’re a resource you can use to save a few seconds or minutes in performing important tasks. We’ve come a long way from MS-DOS, but it’s still a valuable source of automation that anyone can use with no programming knowledge at all.